The 10 ton MH single beam gantry crane is a commonly used tonnage in outdoor freight yards, suitable for lifting general objects. It has a span of up to 30 meters and can be divided into truss type and box type. There can be overhanging cantilevers on the outer side of the support legs, and the cantilever length is less than one-third of the span. The editor will introduce the technical parameters of the 10 ton MH single beam gantry crane to you.

Structural diagram of MH type single beam gantry crane

Technical parameter table for 10 ton MH single beam gantry crane

Lifting capacity			t
Span			m	12	16	20	24	30
Lifting height(m)			m	6;9				9
Operating agencies	Running speed	ground	m/min	20
		driver’s room		30   40
	Electric Motor	ground		YZR132M2-6/3.7×2		YZR160M1-6/6.3×2
		driver’s room
	reducer		mm	ZSC400			ZSC600
	Wheel diameter			φ400		φ500
Electric hoist	model		m/min	CD1   MD1
	Lifting speed		m/min	7    0.7/7
	Running speed			20
	Electric Motor	Rise		ZD151-4/13     ZDS11.5/13
		operational		ZDY21-4/0.8×2
Classification group				A5
Recommended rails				P38     P43
Power				Three-phase AC   380V  50HZ
Crane quality	ground		kg	12238	15059	17423	21120	32700
	driver’s room		kg	12750	15509	17873	21570	33200
Maximum wheel pressure			kN	98/102	105/110	113/118	121/126	142/149
Size	L1		mm	3000	4000	5000	6000	7500
	L2		mm
	H1		mm	1350
	H2		mm	1000	1100	1200	1300	1600
	H3		mm	8350/1135	8450/1450	8550/11550	8650/11650	12250
	B		mm	4500/5500		5500/6500
	B1		mm	5500/6500		6500/7500
	B2		mm	6000/7100		7100/8100
	B3		mm	1600